0283 Superior Thermal Plastic Floor Polish
0283 SUPERIOR THERMOPLASTIC FLOOR POLISH/ PENGILAT LANTAI TERMOPLASTIK (HALAL CERT)
SUPERIOR is specially formulated with high gloss metal cross-linked styrene-acrylic polymer to exhibit the good durability and excellent gloss.
Packaging: 5 LIT
Product Features:
-GREEN Formulation
-Polishing
-Durability
-Excellent gloss
-GREEN Formulation
Suitable for: All decorative hard floor coverings including natural marble, artificial marble, ceramic, terrazzo and vinyl tile.
DIRECTIONS FOR USE:
1. Strip off old floor finish with stripper, using a rotary machine with stripping pad.
2. Use vacuum suction machine to remove the strip wax slurry.
3.Rinse thoroughly with clean water followed by acid solution (acetic acid or sulfuric acid-igm per gallon of water) to neutralize the alkaline.
4.Rinse thoroughly with water and ensure there is no residue of stripper. Use short string mop, dip and wring out so that the mop is wet but not dripping.
5. Apply 3 coats, allowing each coat to dry before recoating.
6.After application, wait for at least 4 hours then burnish with spray buff solution, using a floor burnishing machine with a spray buff pad.
SUPERIOR is specially formulated with high gloss metal cross-linked styrene-acrylic polymer to exhibit the good durability and excellent gloss.
Packaging: 5 LIT
Product Features:
-GREEN Formulation
-Polishing
-Durability
-Excellent gloss
-GREEN Formulation
Suitable for: All decorative hard floor coverings including natural marble, artificial marble, ceramic, terrazzo and vinyl tile.
DIRECTIONS FOR USE:
1. Strip off old floor finish with stripper, using a rotary machine with stripping pad.
2. Use vacuum suction machine to remove the strip wax slurry.
3.Rinse thoroughly with clean water followed by acid solution (acetic acid or sulfuric acid-igm per gallon of water) to neutralize the alkaline.
4.Rinse thoroughly with water and ensure there is no residue of stripper. Use short string mop, dip and wring out so that the mop is wet but not dripping.
5. Apply 3 coats, allowing each coat to dry before recoating.
6.After application, wait for at least 4 hours then burnish with spray buff solution, using a floor burnishing machine with a spray buff pad.
